lz2rr.gif

 

======================================================================================

Manually controlled REMOTE ANTENNA SWITCH >2kW PEP Ready for use:

The system consists of two units, the weatherproof switching box(cast aluminum box) that mounts on your tower or mast and the  manual control unit thats placed at your operating station.

 The connection between the two devices is made using an 8-core cable.(UTP, STP, FSTP….)  standard RJ45 network cable.The system provides ease in switching antennas without disconnecting

 a connector. This  antenna switch can be used for 50ohm( 46 to 75)  systems, plus handle >2000 watts SSB, CW. (Tested for extended periods with ACOM2000-power amplifier) . All unused terminals

 are grounded for static/lightning/RF protection. High power provide special relays with powerful changeover contacts (max current 2x16A . The break down  voltage between contact 1 kV.

When power off all antenna outputs are also grounded. Cast aluminum housing ensures a high degree of shielding and protection from nterference.   A power supply voltage of 10v to 15v is required

 with a current of at least 500 mA.

Frequency range: 1-70 MHz

Max. SWR load:  3:1

Attenuation: < 0.05 dB at 30 MHz

The voltage supply relay: 10-15 V

Current consumption: at less than 300 mA

Temperature range: -35 ... +60 gr C

• Reliable Connectors: Teflon UHF-style SO-239 females,gold plated contacts.

   or N connectors.      If you prefer N type please message me.

• Control Line: Uses any 8 conductor UTP cable.

• Easy-To-Read Antenna Indicators 7segments LEDs indicate the selected antenna.

The device can be used in both directions, reversibly.

 

3-3.jpg        ms7.jpg     UHF6.jpg         Untitled.pngMS3_-3.jpg

 Manual control unit        MS-S7M                      MS-S6M                            MS-S4M                             MS-S3M

 

NAME

 

price in EUR

shipping

MS-S7M

manually controlled REMOTE ANTENNA SWITCH 7 POSITIONS

145

17

MS-S6M

manually controlled REMOTE ANTENNA SWITCH 6 POSITIONS

128

14

MS-S4M

manually controlled REMOTE ANTENNA SWITCH 4 POSITIONS

111

12

MS-S3M

manually controlled REMOTE ANTENNA SWITCH 3 POSITIONS

94

12

MS-M

ONLY Indoor manual remote control unit

47

12

You  pay  for the following set of equipment:

1 pcs: Outdoor unit (with 1m cable and mounting kit included)

1 pcs: Indoor manual remote control unit

1 pcs: Power cord 1 m (needed for the indoor unit)

1 pcs: User Manuale

The set is absolutely ready for use. Quality checked, tested and functioning.

You only need 8pin UTP/FTP straight cable extension to connect the Outdoor to Indoor unit and 12VDC power supply.

======================================================================================

WiFi WEB controlled REMOTE ANTENNA SWITCH >2kW PEP

Also works as a Band Selector for ICOM CAT CI-V interface Ready for use.

              P1.jpg

                                                                                                               WiFi WEB                                                                                                                                             Band selector

The device consists of two units, the weatherproof switching box that mounts on your tower or mast and the web or manual control unit thats placed at your operating station. 

 Connected to internet switch or PC via Wi-Fi. The connection between the two devices is made using an 8-core cable.(UTP, STP, FSTP….)  standard RJ45 network cable.

The system provides ease in switching antennas without disconnecting a connector. This  antenna switch can be used for 50ohm( 46 to 75)  systems, plus handle >2000 watts SSB,

 CW. (Tested for extended periods with ACOM2000-power amplifier) . All unused terminals are grounded for static/lightning/RF protection. Possible option connection between ICOM

 and the selector is made with a 3.5mm jack cable. The device decodes the selected band and switches your pre-selected antenna. 

High power provide special relays with powerful changeover contacts (max current 2x16A . The break down  voltage between contact 1 kV. When power off all antenna outputs are also grounded.

Cast aluminum housing ensures a high degree of shielding and protection from nterference.   A power supply voltage of 10v to 15v is required with a current of at least 500 mA.

 

text875.png            s5.jpg  UHF6.jpg  Untitled.png  MS3_-3.jpg

 

Frequency range: 1-70 MHz

Max. SWR load:  3:1

Attenuation: < 0.05 dB at 30 MHz

The voltage supply relay: 10-15 V

Current consumption: at less than 300 mA

Temperature range: -35 ... +60 gr

• Reliable Connectors: Teflon UHF-style SO-239 females,gold plated contacts.

   or N connectors.      If you prefer N type please message me.

• Control Line: Uses any 8 conductor UTP cable.

• Easy-To-Read Antenna Indicators LCD indicate the selected antenna.

The device can be used in both directions, reversibly.

 

NAME

 

price in EUR

shipping

MS-S7AB

WiFi WEB or BndSelector controlled  ANTENNA SWITCH 7 POSITIONS

171

19

MS-S6AB

WiFi WEB or BndSelector controlled  ANTENNA SWITCH 6 POSITIONS

154

16

MS-S4AB

WiFi WEB or BndSelector controlled  ANTENNA SWITCH 4 POSITIONS

128

14

MS-S3AB

WiFi WEB or BndSelector controlled  ANTENNA SWITCH 3 POSITIONS

111

14

MS-AB

ONLY Indoor remote control unit

64

10

 

You  pay  for the following set of equipment:

1 pcs: Outdoor unit (with 1m cable and mounting kit included)

1 pcs: Indoor remote control unit

1 pcs: Power cord 1 m (needed for the indoor unit)

1 pcs: CAT-interface cord 1 m

1 pcs: User Manuale

The set is absolutely ready for use. Quality checked, tested and functioning.

You only need 8pin UTP/FTP straight cable extension to connect the Outdoor to Indoor unit and 12VDC power supply.

======================================================================================

WiFi WEB controlled REMOTE 4ANTENNAS TO 3RADIO SELECTOR SWITCH  >2kW PEP Ready for use:

 

                                

                                                                                                                                                                         

 

The MS-3TO4 consists of two units, the weatherproof switching box and web or manual control unit thats placed at your operating station.  Connected to eternal  switch or PC via Wi-Fi.

The MS-3TO4 provides ease in switching between 1 of 3radios to 1 of  4antennas without disconnecting a connector. This antenna switch can be used for 50 ohm (46 to 75) systems, plus handle 2000

 watts . (Tested for extended periods with ACOM2000-power amplifier) 

 

                                     p1.jpg

 All unused terminals are automatically grounded for static/lightning/RF protection.

High power provide special relays with powerful changeover contacts (max current 32A The breakdown  voltage between contact 1 kV. When power off all antenna outputs are also grounded.

Cast aluminum housing ensures a high degree of shielding and protection from nterference.

The control device can make a connection to your  WiFi  wireless network and be managed by a browser, PC, tablet, or smartphone.

Frequency range: 1-60 MHz

Max. SWR load:  3:1

Attenuation: < 0.05 dB at 30 MHz

The voltage supply relay: 10-15 V

Current consumption: at less than 300 mA

Temperature range: -35 ... +60 gr

• Reliable Connectors: Teflon UHF-style SO-239 females,gold plated contacts.

   or N connectors.      If you prefer N type please message me.

• Control Line: Uses any 8 conductor UTP cable.

• Easy-To-Read Antenna Indicators LCD indicate the selected antenna.

The device can be used in both directions, reversibly.

 

NAME

 

price in EUR

shipping

MS-3TO4

WiFi WEB controlled  4ANTENNA to 3RADIOS  SWITCH

171

19

 

You  pay  for the following set of equipment:

1 pcs: Outdoor unit (with 1m cable and mounting kit included)

1 pcs: Indoor remote control unit

1 pcs: Power cord 1 m (needed for the indoor unit)

1 pcs: User Manuale

The set is absolutely ready for use. Quality checked, tested and functioning.

You only need 8pin UTP/FTP straight cable extension to connect the Outdoor to Indoor unit and 12VDC power supply.

 

======================================================================================

 

MS-S5 WiFi controlled low power antenna switch compatible with KiwiSDR  

 

preden.jpg                       kapak1.jpg

The system provides ease in switching antennas without disconnecting a connector. This  antenna switch can be used for 46 to 75 ohm systems, Designed for low power (for receivers).

 All unused terminals are automatically grounded for static/lightning/RF protection.

When power off all antenna outputs are also grounded.

 

kiwisdr2.jpg

 

 

For independent control switching antennas is use manual control or via WEB-browser from smartphone, tablet or PC.  The antenna selector has a universal application or Kiwi SDR.

 

NAME

 

price in EUR

shipping

MS-S5

WiFi controlled low power antenna switch compatible with KiwiSDR  

99

17

You  pay  for the following set of equipment:

1 pcs: Indoor remote control unit

1 pcs: Power cord 1 m (needed for the indoor unit)

1 pcs: User Manuale

The set is absolutely ready for use. Quality checked, tested and functioning.

 

======================================================================================

                                                IC-9700 PTT Multiplier

PTT multiplier for Icom IC-9700 (also works with Icom IC-9100 and Icom IC-7100) Depending on the band, it selects one of the three outputs and the PTT for the corresponding amplifier

Automatic selection of the correct frequency band used.Powered by 12v DC from ACC connector of radio.  It was specially developed for use with the Icom IC-9700 and IC-9100 devices

and allows the connection and use of a separate power amplifier for each of 144, 430 and 1296 MHz. The PTT multiplier automatically recognizes the currently selected operating range

 based on the CI-V band data from the transceiver and switches to the correct power amplifier for the currently active frequency band without any further interaction by the user. A status

 LED provides monitoring of the selected setting at all times.

Plug and Play         92 x 66 x 20 mm

 

 

Untitled-4                                                                     a1

 

NAME

 

price in EUR

 

PTT IC-9700

65

 

 

You  pay  for the following set of equipment:

1 pcs:  control unit

1 pcs: Cord 1 m

1 pcs: User Manuale

The set is absolutely ready for use. Quality checked, tested and functioning.

 

 

PTT Sequencer V2.0

 

The PTT Sequencer V2.0 is designed to provide safe sequential switching of RF equipment during transmit (TX) and receive (RX) operation.

The relay switching delays are fully programmable through a built-in Wi-Fi configuration interface and are stored in non-volatile EEPROM memory.

Typical applications include:

·     VHF/UHF/SHF transverter systems

·     Mast-mounted preamplifiers

·     High-power RF amplifiers

·     RF coaxial relay switching

·     Multi-band microwave stations

. A status LED provides monitoring of the selected relay at all times.

Plug and Play         44 x 47 x 10 mm

 

 

sek2.jpg                                               pcb-2.jpg       

 

 

                         

                                    blok.jpg

 

 

NAME

 

price in EUR

 

PTT Sequencer

59

 

 

You  pay  for the following set of equipment:

1 pcs:  control unit

1 pcs: User Manuale

The set is absolutely ready for use. Quality checked, tested and functioning.

 

======================================================================================

with payment via:
 PayPal:

yavor@anteni.net

Please provide the exact address.

The set is absolutely ready for use. Quality checked, tested and functioning.

SHIPPING: AIRMAIL not insured post service with recommendation and priority, parcel released upon signature, with tracking number. Usually needs 2 weeks to arrive to you, 

sometimes faster (1 week), sometimes slower (3-5 weeks)

·         Returns Accepted

·         After receiving the item,  buyer should contact  within: 30 Days

·         Return shipping will be paid by: Buyer

·         Refund will be given as: Money Back

======================================================================================

For purchases or questions please write to:

mirolz2rr@gmail.com or miro@mnet.bg or office@anteni.net

 

The author reserves the right to make changes that do not degrade the performance of the device.

73,Miro (LZ2RR) ANTENI.NET Ltd.